Chains for Forklifts

Forklift Chain - The life of the lift truck lift chains can actually be prolonged with proper maintenance and care. Lubricating properly is actually a great way so as to lengthen the capability of this forklift part. It is really essential to apply oil occasionally utilizing a brush or whichever lube application device. The volume and frequency of oil application must be adequate so as to prevent whatever rust discoloration of oil in the joints. This reddish brown discoloration generally signals that the lift chains have not been correctly lubricated. If this condition has happened, it is extremely imperative to lubricate the lift chains immediately.

It is typical for some metal to metal contact to happen during lift chain operation. This could result in parts to wear out in time. The industry standard considers a lift chain to be worn out if 3 percent elongation has happened. So as to stop the scary likelihood of a disastrous lift chain failure from happening, the maker greatly suggests that the lift chain be replaced before it reaches 3% elongation. The lift chain gets longer due to progressive joint wear that elongates the chain pitch. This elongation is capable of being measured by placing a certain number of pitches under tension.

One more factor to ensuring good lift chain maintenance is to check the clevis pins on the lift chain for signs of wear and tear. The lift chains have been assembled so that the tapered faces of the clevis pin are lined up. Normally, rotation of the clevis pins is often caused by shock loading. Shock loading takes place when the chain is loose and then suddenly a load is applied. This causes the chain to go through a shock as it 'snaps' under the load tension. Without the proper lubrication, in this situation, the pins can rotate in the chain's link. If this scenario takes place, the lift chains have to be replaced right away. It is imperative to always replace the lift chains in pairs so as to ensure even wear.


Click to Download the pdf

Forklift Parts

Cushion Tire Forklift Part

Cushion Tire Forklift Parts - Cushion tires are a solid tire with a smooth profile. Its' tread is attached to a steel ring so as to form the tire, and the tire is pressed onto a hub which is connected to the forklift. These kinds of tires are suited for use in smooth floor warehouses and are available in different...

More

---

Water Pump for Forklift

Forklift Water Pump - Attached to the crankshaft of the engine; the water pump is a basic centrifugal pump that is driven by a belt. The pump then circulates fluid when the engine is running. The water pump makes use of centrifugal force so as to send water to the outside as it turns. This action causes fluid to be...

More

---

Heavy Duty Scissor Lift Part

Heavy Duty Scissor Lift Parts - A scissor lift truck is made up of the the scissor legs, the platform and the lower frame assembly. Scissor lifts are based on the concept of lowering or raising a platform which could be used in order to transport different stuff. These pieces of machinery are useful if you need to lift materials...

More

---

Carton Clamp Attachment

Carton Clamp Attachments - The Carton Clamp is one of the more adaptable lift truck attachments, used to be able to handle a lot of unsecured stuff on a pallet like for instance frozen cartons, appliances, furniture or canned goods. Large rubber pads carefully press the side of the load, gently lifting it up to transport it to its next...

More

---

Forklift Fork Positioners

Forklift Fork Positioner - A fork positioner is actually a device constructed out of top quality materials meant to be able to endure the most challenging operations and work environments. This piece of equipment could enable the individual driving to be able to work the blades hydraulically without leaving the seat. Side shifting units have the extra ability to laterally...

More

---

Narrow Aisle Forklift Part

Narrow Aisle Forklift Parts - Few people at first were able to see the impact that container shipping would have in the shipping business. One economist during the 1950s, namely Benjamin Chinitz of Harvard University, predicted that containerization would have really benefit New York, by allowing it to ship more efficiently to the southern areas of the US. He did...

More

---

Parts for Manual Pallet Jack

Manual Pallet Jack Parts - Within a warehouse, factory or transport business, pallet racks are a common and necessary thing. Pallet racks comprise a framework or structure built in order to house pallets. Usually, these racks are constructed of steel piping and may even include cast iron netting on every level for extra strength. Typically, the racks are open on...

More

---

Reach Stacker Part

Reach Stacker Parts - Used in almost all warehouse operations, boat yards or industrial construction sites, the lift truck is a very important component to be able to help pick up and transport goods. The reach feature of a lift truck can help better the applications which the lift truck can complete like for instance stacking pallets on a high...

More

---